Technical data - electrical ratings
| Voltage supply | 5 VDC ±5 % 8...30 VDC |
|---|---|
| Reverse polarity protection | Yes |
| Consumption w/o load | ≤100 mA |
| Pulses per revolution | 1000 … 2500 |
| Reference signal | Zero pulse, width 90° |
| Sensing method | Optical |
| Output frequency | ≤120 kHz |
| Output signals | A, B, N + inverted |
| Output stages | TTL linedriver (short-circuit proof) HTL push-pull (short-circuit proof) |
| Interference immunity | EN 61000-6-2 |
| Emitted interference | EN 61000-6-3 |
Technical data - mechanical design
| Size (flange) | ø150 mm |
|---|---|
| Shaft type | ø40...65 mm (through hollow shaft) |
| Mounting kit | 051 |
| Protection EN 60529 | IP 54 |
| Operating speed | ≤4000 rpm |
| Material | Housing: aluminium, black, powder-coated Shaft: stainless steel |
| Operating temperature | -20...+70 °C |
| Relative humidity | 90 % non-condensing |
| Resistance | EN 60068-2-6 Vibration 10 g, 55-2000 Hz EN 60068-2-27 Shock 100 g, 6 ms |
| Connection | Connector M23 type 2, 12-pin |
| Weight approx. | 2900 g |
Data sheet
Declaration of conformity
DoC / CoC - ITD 20, ITD 28, ITD 40, ITD 42, ITD 48, ITD 70
BG/CZ/DE/DK/EN/ES/FI/FR/GR/HU/KO/LT/LV/NL/NO/PL/PT/RO/SI/SK
Drawings for this sensor aren't loaded yet.
View drawings on Baumer ↗