Technical data - electrical ratings
| Voltage supply | 4.75...30 VDC |
|---|---|
| Reverse polarity protection | Yes |
| Consumption w/o load | ≤40 mA (24 VDC) ≤130 mA (4.75 VDC) + output load, max. 250 mA |
| Pulses per revolution | 1024 … 80000 |
| Accuracy | ≤60 arc-seconds |
| Sensing method | Optical |
| Output frequency | ≤300 kHz (TTL) ≤160 kHz (HTL) |
| Output signals | A, B, Z A, B, Z + complement, ½ cycle index gated with negative B channel |
| Output stages | Linedriver (TTL, 7272) Vout = 5 V, short-circuit proof Push-pull (HTL, 7272) Vout = Vin, short-circuit proof |
| Interference immunity | EN 61000-6-2 |
| Emitted interference | EN 61000-6-3 |
| Approval | UL approval / E240061 RoHS compliant EU guideline 2011/65/EC CE |
Technical data - mechanical design
| Size (flange) | ø3.15" (ø80 mm) |
|---|---|
| Shaft type | ø0.375...1" (ø9.525...25.4 mm) (through hollow shaft isolated) |
| Bore runout | 0.0016" (0.04 mm) TIR max. |
| Admitted misalignment | 0.004" (0.1016 mm) radial TIR (end of shaft) 0.01" (0.254 mm) axial |
| Protection EN 60529 | IP 54 IP 65 IP 67 |
| Operating speed | ≤5000 rpm (see temperature diagram) |
| Bearing | 52100 SAE high carbon steel (ABEC 5) |
| Starting torque | ≤3 in-oz (77 °F, IP 65) ≤0.02 Nm (+25 °C, IP 65) |
| Rotor moment of inertia | 2.3 oz-in² (420 gcm²) |
| Service life | Bearing: typ. 13 billion rev. (89000 h/2500 rpm) |
| Material | Housing: aluminium, powder-coated Shaft: stainless steel |
| Operating temperature | -40...+212 °F (-40...+100 °C), (fixed cable): see temperature diagram |
| Relative humidity | 98 % non-condensing |
| Resistance | EN 60068-2-6 Vibration 20 g, 60-2000 Hz EN 60068-2-27 Shock 200 g, 6 ms |
| Connection | MIL-connector, 7-pin MIL-connector, 10-pin Cable (AWG26 wire) |
| Weight approx. | 23 oz. 660 g |
Data sheet
Quickstart
Certificates / approvals
Declaration of conformity
DoC / CoC - HS35F
BG/CZ/DE/DK/EN/ES/FI/FR/GR/HU/KO/LT/LV/NL/NO/PL/PT/RO/SI/SK
Drawings & CAD
📐
↓
Tether T1 - 3D drawing / PDF
📐
↓
Tether T1 - 3D drawing / STEP
📐
↓
Tether T3 - 3D drawing / PDF
📐
↓
Tether T3 - 3D drawing / STEP
📐
↓
Tether T4 - 3D drawing / PDF
📐
↓
Tether T4 - 3D drawing / STEP
📐
↓
Tether T5 - 3D drawing / PDF
📐
↓
Tether T5 - 3D drawing / STEP
📐
↓
HS35 3D drawing cable, ø25.4 mm, IP54/IP65 / PDF
📐
↓
HS35 3D drawing cable, ø25.4 mm, IP54/IP65 / STEP
📐
↓
HS35 3D drawing cable, ø25.4 mm, IP67 / PDF
📐
↓
HS35 3D drawing cable, ø25.4 mm, IP67 / STEP
📐
↓
HS35 3D drawing connector 7-pin, ø25.4 mm, IP54/IP65 / PDF
📐
↓
HS35 3D drawing connector 7-pin, ø25.4 mm, IP54/IP65 / STEP
📐
↓
HS35 3D drawing connector 10-pin, ø25.4 mm, IP67 / PDF
📐
↓
HS35 3D drawing connector 10-pin, ø25.4 mm, IP67 / STEP
📐
↓
HS35 3D drawing connector 10-pin, ø25.4 mm, IP54/IP65 / PDF
📐
↓
HS35 3D drawing connector 10-pin, ø25.4 mm, IP54/IP65 / STEP
📐
↓
Reducer insert HS35 ø0.375” (ø9.525 mm) - 3D drawing / STEP
📐
↓
Reducer insert HS35 ø0.50” (ø12.7 mm) - 3D drawing / STEP
📐
↓
Reducer insert HS35 ø0.625” (ø15.875 mm) - 3D drawing / STEP
📐
↓
Reducer insert HS35 ø0.75” (ø19.05 mm) - 3D drawing / STEP
📐
↓
Reducer insert HS35 ø0.87” (ø22.225 mm) - 3D drawing / STEP
📐
↓
Reducer insert HS35 ø10 mm - 3D drawing / STEP
📐
↓
Reducer insert HS35 ø12 mm - 3D drawing / STEP
📐
↓
Reducer insert HS35 ø14 mm - 3D drawing / STEP
📐
↓
Reducer insert HS35 ø15 mm - 3D drawing / STEP
📐
↓
Reducer insert HS35 ø16 mm - 3D drawing / STEP
📐
↓
Reducer insert HS35 ø18 mm - 3D drawing / STEP
📐
↓
Reducer insert HS35 ø20 mm - 3D drawing / STEP
📐
↓
Protective cover HS35 - 3D drawing / STEP