Technical data - electrical ratings
| Voltage supply | 4.75...30 VDC |
|---|---|
| Reverse polarity protection | Yes |
| Short-circuit proof | Yes |
| Consumption w/o load | ≤70 mA |
| Initializing time | ≤ 30 ms after power on |
| Pulses per revolution | 1 … 65536 |
| Duty cycle | 45…55 % typical at 1024, 2048 ppr (further see table Duty cycle) |
| Reference signal | Zero pulse 90° or 180° |
| Sensing method | Optical |
| Output frequency | ≤300 kHz (TTL) ≤160 kHz (HTL) |
| Output signals | A+, B+, R+, A-, B-, R- |
| Output stages | TTL/RS422 HTL/push-pull |
| Programmable parameters | Output level TTL/HTL Pulse number 1...65536 Zero pulse width 90°/180° Zero pulse position Signal sequence |
| Interference immunity | EN 61000-6-2 |
| Emitted interference | EN 61000-6-3 |
| Approval | UL 508 / CSA 22.2 |
Technical data - mechanical design
| Size (flange) | 2.5 x 2.5" (63.5 x 63.5 mm) |
|---|---|
| Shaft type | ø10 x 20 mm, solid shaft with flat ø3/8" x 4/5" (ø9.525 x 20.32 mm), solid shaft with flat |
| Admitted shaft load | ≤40 N axial ≤80 N radial |
| Flange | Square flange 2.5" (63.5 mm) |
| Protection EN 60529 | IP 65 (without shaft seal) IP 67 (with shaft seal) |
| Operating speed | ≤6000 rpm (+20 °C, IP 67) ≤12000 rpm (+20 °C, IP 65) |
| Starting torque | ≤0.015 Nm (+20 °C, IP 65) ≤0.02 Nm (+20 °C, IP 67) |
| Material | Housing: aluminium die-cast Flange: aluminium Solid shaft: stainless steel |
| Operating temperature | -40...+100 °C |
| Relative humidity | 90 % non-condensing |
| Resistance | EN 60068-2-6 Vibration 30 g, 10-2000 Hz EN 60068-2-27 Shock 300 g, 6 ms |
| Connection | Flange connector M12, 8-pin Flange connector M23, 12-pin Cable |
| Weight approx. | 370 g |
Data sheet
Quickstart
EIL580-SQ
DE/EN/FR/IT/ES
Software
Certificates / approvals
Brochures / Catalogs
Declaration of conformity
DoC / CoC - EIL580P, ITD2PH00.2
BG/CZ/DE/DK/EN/ES/FI/FR/GR/HU/KO/LT/LV/NL/NO/PL/PT/RO/SI/SK
Drawings & CAD
📐
↓
EIL580-SQ10: Square flange, solid shaft ø10 mm, cable axial, IP65 / STEP (EIL580-SQ10.5Tx.xxxxx.A)
📐
↓
EIL580-SQ10: Square flange, solid shaft ø10 mm, cable axial, IP67 / STEP (EIL580-SQ10.7Tx.xxxxx.A)
📐
↓
EIL580-SQ10: Square flange, solid shaft ø10 mm, cable radial, IP65 / STEP (EIL580-SQ10.5Rx.xxxxx.A)
📐
↓
EIL580-SQ10: Square flange, solid shaft ø10 mm, cable radial, IP67 / STEP (EIL580-SQ10.7Rx.xxxxx.A)
📐
↓
EIL580-SQ10: Square flange, solid shaft ø10 mm, cable tangential, IP65 / STEP (EIL580-SQ10.5Px.xxxxx.A)
📐
↓
EIL580-SQ10: Square flange, solid shaft ø10 mm, cable tangential, IP67 / STEP (EIL580-SQ10.7Px.xxxxx.A)
📐
↓
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M12 axial, IP65 / STEP (EIL580-SQ10.5Ax.xxxxx.A)
📐
↓
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M12 axial, IP67 / STEP (EIL580-SQ10.7Ax.xxxxx.A)
📐
↓
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M12 radial, IP65 / STEP (EIL580-SQ10.5Bx.xxxxx.A)
📐
↓
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M12 radial, IP67 / STEP (EIL580-SQ10.7Bx.xxxxx.A)
📐
↓
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M23 axial, IP65 / STEP (EIL580-SQ10.5Dx.xxxxx.A)
📐
↓
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M23 axial, IP67 / STEP (EIL580-SQ10.7Dx.xxxxx.A)
📐
↓
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M23 radial, IP65 / STEP (EIL580-SQ10.5Fx.xxxxx.A)
📐
↓
EIL580-SQ10: Square flange, solid shaft ø10 mm, connector M23 radial, IP67 / STEP (EIL580-SQ10.7Fx.xxxxx.A)