OZDM 16P1901/S14
Contrast sensor
← Back to Sensors
General data
| Type | Diffuse contrast sensor |
|---|
| Optimum operating distance | 40 … 80 mm |
|---|
| Detectable remission difference (on grey) | > 8 % |
|---|
| Output indicator | LED yellow |
|---|
| Sensitivity adjustment | Potentiometer, 14 turn |
|---|
| Distance to focus | 80 mm |
|---|
Light Source
| Light source | Pulsed red laser diode |
|---|
| Laser class | 1 |
|---|
| Wave length | 650 nm |
|---|
Electrical data
| Voltage supply range +Vs | 12 … 30 VDC |
|---|
| Current consumption max. (no load) | 65 mA |
|---|
| Current consumption typ. | 60 mA |
|---|
| Output function | Light operate |
|---|
| Output circuit | PNP / analog 4 ... 20 mA |
|---|
| Output current | 200 mA |
|---|
| Short circuit protection | Yes |
|---|
| Reverse polarity protection | Yes |
|---|
Mechanical data
| Width / diameter | 15.4 mm |
|---|
| Height / length | 50 mm |
|---|
| Depth | 50 mm |
|---|
| Design | Rectangular |
|---|
| Housing material | Die-cast zinc |
|---|
| Front (optics) | Glass |
|---|
| Connection types | Connector M12 4 pin |
|---|
Ambient conditions
| Protection class | IP 67 |
|---|
| Operating temperature | -10 … +50 °C |
|---|
Beam characteristic (typically)
