Sensor
| Sensor | Sony IMX426 Gen3 |
|---|---|
| Mono/Color | Color |
| Sensor type | 1/1.7″ CMOS |
| Shutter type | Global shutter |
| Resolution | 800 × 608 px |
| Pixel size | 9 × 9 µm |
| Exposure time | 0.001 … 60000 ms |
Image Formats & Frame Rate
| Image formats, interface frame rate max. | Full Frame, 800 × 608 px, max. 1622 fps Binning 2×2, 400 × 304 px, max. 1622 fps Binning 2×1, 400 × 608 px, max. 1622 fps Binning 1×2, 800 × 304 px, max. 1622 fps |
|---|---|
| Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 800 × 608 px, max. 1622 fps |
| Pixel formats | BayerRG8 BayerRG10 BayerRG12 BayerRG12 Packed Mono8 Mono10 Mono12 Mono12 Packed RGB8 BGR8 |
Functions & Controls
| Analog controls | Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit) |
|---|---|
| Color models | Mono Raw Bayer RGB BGR |
| Basic Functions | Exposure Gain / Color Gain Free Running Mode (Live Image) Trigger / Exposure Active (Flash) Binning 2x2 Partial Scan Offset |
| Auto Functions | Exposure Auto Gain Auto White Balance Auto Color Transformation Auto |
| Image Pre-processing | Image Flipping (X/Y) Color Processing (RGB, BGR, Mono) Color Enhancement (with optimized ColorTransformationMatrix) LUT / Gamma JPEG Image Compression |
| Acquisition / Interface | Burst Mode Adjustable Framerate Short Exposure Time Enable Device Link Throughput Limit Internal Image Buffer |
| Additional Functions | User Set Integrated temperature sensor Readable additional information (e.g. sensor information) Save Custom Data |
| Internal image buffer | 1024 MB|2137 images (Trigger Mode)|1 image (Free Running Mode) |
Synchronization & I/O
| Synchronization | free running trigger Sequencer |
|---|---|
| Trigger sources | Hardware Software ActionCommand |
| Trigger delay | 0 … 2 s, tracking and buffering of up to 256 trigger signals |
| Process Synchronization | Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Action CMD Request ID Trigger ID inside Chunk Additional Output Modes (e.g. Trigger Ready) PWM (PWM Duration / PWM Duty Cycle) Selectable Output format (e.g. Tri State, Push Pull) Chunk data inside transferred image Encoder support via Counter End trigger source 4 power outputs with up to 120 W (max. 48 V / 2.5 A) |
| Lines | 2 input lines 4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A) RS232 |
Interface & Connectivity
| Data interface | 10 Gigabit Ethernet, Transfer rate 10000 Mbits/sec, Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8-pol x-coded (SACC-CI-M12FS-8CON-L180-10G) |
|---|---|
| Process interface | M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180) |
| Power supply | via M12/12 pins a-coded |
Mechanical
| Lens mount | C-mount |
|---|---|
| Width | 60 mm |
| Height | 60 mm |
| Depth | 99.7 mm |
| Weight | ≤ 485 g |
| Material | aluminum |
| Protection class | IP 40 IP 54 (with mounted tube and cable) IP 65 (with mounted tube and cable) IP 67 (with mounted tube and cable) |
Electrical & Environment
| Power consumption | Approx. 11.7 W 24 VDC and 1622.0 fps |
|---|---|
| Flash memory size | 128 kB |
| Operating temperature | 0 … +60 ° T = measurement point |
| Humidity | 10 … 90 % (non-condensing) |
Compliance
| Conformity | CE UL recognized KC (R-R-BkR-VLXT-71MI) |
|---|
Other
| Dark noise | 23.29 e- |
|---|---|
| Saturation capacity | 1201984 e- |
| Dynamic range | 72.2 dB |
| Signal-to-noise ratio | 50.1 dB |
| Quantum efficiency | 53.2 % 465 nm|63.4 % 536 nm|61 % 631 nm |
| Image processing | JPEG |
| Time synchronization IEEE 1588 | IEEE 1588 / Master and Slave function IEEE 1588 / Scheduled Action CMD IEEE 1588 / Synchronized Acquisition Framerate |
| Lens control | Corning liquid lens |
| Sequencer | Automated control for series of images using different sets of parameters |
| Sequencer parameter | output line Exposure time gain factor ROI Offset x ROI Offset y |
| Voltage supply range +Vs | 19.2 … 28.8 V DC (external power supply) |
