Sensor
| Sensor | Sony IMX273 Gen2 |
|---|---|
| Mono/Color | Color |
| Sensor type | 1/2.9″ CMOS |
| Shutter type | Global shutter |
| Resolution | 1440 × 1080 px |
| Pixel size | 3.45 × 3.45 µm |
| Exposure time | 0.001 … 60000 ms |
Image Formats & Frame Rate
| Image formats, interface frame rate max. | Full Frame, 1440 × 1080 px, max. 224 fps Binning 2×2, 720 × 540 px, max. 224 fps Binning 2×1, 720 × 1080 px, max. 224 fps Binning 1×2, 1440 × 540 px, max. 224 fps |
|---|---|
| Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 1440 × 1080 px, max. 226 fps |
| Pixel formats | BayerRG8 BayerRG10 BayerRG12 BayerRG12 Packed Mono8 Mono10 Mono12 Mono12 Packed RGB8 BGR8 |
Functions & Controls
| Analog controls | Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit) |
|---|---|
| Color models | Mono Raw Bayer RGB BGR |
| Basic Functions | Exposure Gain / Color Gain Trigger / Exposure Active (Flash) Binning 2x2 Partial Scan Offset Free Running Mode (Live Image) |
| Auto Functions | Exposure Auto Gain Auto White Balance Auto Color Transformation Auto |
| Image Pre-processing | Image Flipping (X/Y) Color Processing (RGB, BGR, Mono) Color Enhancement (with optimized ColorTransformationMatrix) LUT / Gamma |
| Acquisition / Interface | Burst Mode Adjustable Framerate Short Exposure Time Enable Device Link Throughput Limit Internal Image Buffer |
| Additional Functions | User Set Integrated temperature sensor Readable additional information (e.g. sensor information) Save Custom Data |
| Internal image buffer | 428 MB|96 images (Trigger Mode)|1 image (Free Running Mode) |
Synchronization & I/O
| Synchronization | free running trigger |
|---|---|
| Trigger sources | Hardware Software |
| Trigger delay | 0 … 2 sec, tracking and buffering of up to 256 trigger signals |
| Process Synchronization | Events Timer Trigger Delay Debouncer Counter Chunk data inside transferred image Encoder support via Counter End trigger source |
| Lines | 1 input line 1 output line 2 general purpose lines |
Interface & Connectivity
| Data interface | USB 3.0, Transfer Rate 5000 Mbits/sec, Connector: USB 3.0 Micro B |
|---|---|
| Process interface | M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180) |
| Power supply | via USB 3.0 interface |
Mechanical
| Lens mount | C-mount |
|---|---|
| Width | 29 mm |
| Height | 29 mm |
| Depth | 38 mm |
| Weight | ≤ 90 g |
| Material | zinc die casting, baked varnish |
| Protection class | IP 40 |
Electrical & Environment
| Power consumption | Approx. 3.3 W 224 fps |
|---|---|
| Flash memory size | 128 kB |
| Operating temperature | 0 … +65 ° T = measurement point |
| Humidity | 10 … 90 % (non-condensing) |
Compliance
| Conformity | CE RoHS |
|---|
Other
| Dark noise | 2.1 e- |
|---|---|
| Saturation capacity | 9390 e- |
| Dynamic range | 70.6 dB |
| Signal-to-noise ratio | 39.7 dB |
| Quantum efficiency | 46.2 % 465 nm|57.6 % 536 nm|53.6 % 631 nm|46.1 % 467 nm|58.7 % 533 nm|53.8 % 630 nm |
| Operating voltage | 5 VDC (via USB3.0 interface) |
