Sensor
| Sensor | onsemi PYTHON1300 |
|---|---|
| Mono/Color | Mono |
| Sensor type | 1/2″ CMOS |
| Shutter type | Global shutter |
| Resolution | 1280 × 1024 px |
| Pixel size | 4.8 × 4.8 µm |
| Exposure time | 0.02 … 1000 ms |
Image Formats & Frame Rate
| Image formats, interface frame rate max. | Full Frame, 1280 × 1024 px, max. 222 fps Binning 2×2, 640 × 512 px, max. 222 fps Binning 2×1, 640 × 1024 px, max. 222 fps Binning 1×2, 1280 × 512 px, max. 222 fps |
|---|---|
| Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 1280 × 1024 px, max. 222 fps |
| Pixel formats | Mono8 Mono10 |
Functions & Controls
| Analog controls | Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit) |
|---|---|
| Color models | Mono |
| Basic Functions | Exposure Gain Trigger / Exposure Active (Flash) Binning 2x2 Partial Scan Offset Free Running Mode (Live Image) |
| Auto Functions | Exposure Auto Gain Auto |
| Image Pre-processing | Image Flipping (X/Y) LUT / Gamma |
| Acquisition / Interface | Burst Mode Adjustable Framerate Device Link Throughput Limit Internal Image Buffer |
| Additional Functions | User Set Integrated temperature sensor Readable additional information (e.g. sensor information) |
| Calibration data | Camera calibration data (user defined storage for intrinsic / extrinsic camera parameters, and geometry distortion values) Customer data storage (128 bytes user defined) |
| Internal image buffer | 477 MB|127 images (Trigger Mode)|1 image (Free Running Mode) |
Synchronization & I/O
| Synchronization | free running trigger |
|---|---|
| Trigger sources | Hardware Software |
| Trigger delay | 0 … 2 sec, tracking and buffering of up to 256 trigger signals |
| Process Synchronization | Events Timer Trigger Delay Debouncer Counter Chunk data inside transferred image Encoder support via Counter End trigger source |
| Lines | 1 input line 1 output line 2 general purpose lines |
Interface & Connectivity
| Data interface | USB 3.0, Transfer Rate 5000 Mbits/sec, Connector: USB 3.0 Micro B |
|---|---|
| Process interface | M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180) |
| Power supply | via USB 3.0 interface |
Mechanical
| Lens mount | C-mount |
|---|---|
| Width | 29 mm |
| Height | 29 mm |
| Depth | 38 mm |
| Weight | ≤ 90 g |
| Material | zinc die casting, baked varnish |
| Protection class | IP 40 |
Electrical & Environment
| Power consumption | Approx. 2.7 W 222 fps |
|---|---|
| Flash memory size | 128 kB |
| Operating temperature | 0 … +65 ° T = measurement point |
| Humidity | 10 … 90 % (non-condensing) |
Compliance
| Conformity | CE RoHS |
|---|
Other
| Dark noise | 9.78 e- |
|---|---|
| Saturation capacity | 6952 e- |
| Dynamic range | 56.3 dB |
| Signal-to-noise ratio | 38.4 dB |
| Quantum efficiency | 53.5 % 536 nm |
| Operating voltage | 5 VDC (via USB3.0 interface) |
