Sensor
| Sensor | ON Semiconductor PYTHON5000 |
|---|---|
| Mono/Color | Color |
| Sensor type | 1″ CMOS |
| Shutter type | Global shutter |
| Resolution | 2592 × 2048 px |
| Pixel size | 4.8 × 4.8 µm |
| Exposure time | 0,02 … 1000 ms |
Image Formats & Frame Rate
| Image formats, interface frame rate max. | Full Frame, 2592 × 2048 px, max. 23 fps Binning 2×2, 1296 × 1024 px, max. 28 fps Binning 2×1, 1296 × 2048 px, max. 28 fps Binning 1×2, 2592 × 1024 px, max. 28 fps |
|---|---|
| Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 2592 × 2048 px, max. 28 fps |
| Pixel formats | BayerRG8 BayerRG10 Mono8 Mono10 RGB8 BGR8 |
Functions & Controls
| Analog controls | Gain (0 … 18 dB) Offset (0 … 63 LSB 10 Bit) |
|---|---|
| Color models | Mono RGB BGR |
| Basic Functions | Exposure Gain / Color Gain Trigger / Exposure Active (Flash) Binning 2x2 Partial Scan Offset Free Running Mode (Live Image) |
| Auto Functions | Exposure Auto Gain Auto White Balance Auto Color Transformation Auto |
| Image Pre-processing | Image Flipping (X/Y) Color Processing (RGB, BGR, Mono) Color Enhancement (with optimized ColorTransformationMatrix) LUT / Gamma |
| Acquisition / Interface | Burst Mode Adjustable Framerate Short Exposure Time Enable Device Link Throughput Limit Internal Image Buffer |
| Additional Functions | User Set Integrated temperature sensor Readable additional information (e.g. sensor information) Save Custom Data |
| Internal image buffer | 122 MB|8 images (Trigger Mode)|1 image (Free Running Mode) |
Synchronization & I/O
| Synchronization | free running trigger |
|---|---|
| Trigger sources | Hardware Software ActionCommand |
| Trigger delay | 0 … 2 sec, tracking and buffering of up to 256 trigger signals |
| Process Synchronization | Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) PWM (PWM Duration / PWM Duty Cycle) 4 power outputs with up to 120 W (max. 48 V / 2.5 A) Selectable Output format (e.g. Tri State, Push Pull) Chunk data inside transferred image Encoder support via Counter End trigger source |
| Lines | 4 input lines 4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A) |
Interface & Connectivity
| Data interface | Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8 pol x-coded, screwable type |
|---|---|
| Process interface | M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180) |
| Power supply | via M12/12 pins a-coded or Power over Ethernet (PoE) |
Mechanical
| Lens mount | C-mount |
|---|---|
| Width | 40 mm |
| Height | 40 mm |
| Depth | 50,8 mm |
| Weight | ≤ 137 g |
| Material | aluminum, hard-anodized |
| Protection class | IP 40 IP 54 (with mounted tube and cable) IP 65 (with mounted tube and cable) IP 67 (with mounted tube and cable) IP 69K (with stainless steel housing accessory) |
Electrical & Environment
| Power consumption | approx. 2,9 W 12 VDC and 23 fps approx. 3,6 W 48 VDC (PoE) and 23 fps |
|---|---|
| Flash memory size | 128 kB |
| Operating temperature | -40 ... +70 °C T = measurement point |
| Humidity | 10 … 90 % (non-condensing) |
Compliance
| Conformity | CE RoHS EAC |
|---|
Other
| Voltage supply range +Vs | 12 … 24 V DC (external power supply)|36 … 57 V DC (Power over Ethernet) |
|---|
