Sensor
| Sensor | Sony IMX226 |
|---|---|
| Mono/Color | Color |
| Sensor type | 1/1.7″ CMOS |
| Shutter type | Rolling shutter Global reset shutter |
| Resolution | 4000 × 3000 px |
| Pixel size | 1.85 × 1.85 µm |
| Exposure time | 0.0085 … 60000 ms |
Image Formats & Frame Rate
| Image formats, interface frame rate max. | Full Frame, 4000 × 3000 px, max. 10 fps Binning 2×2, 2000 × 1500 px, max. 15 fps Binning 2×1, 2000 × 3000 px, max. 10 fps Binning 1×2, 4000 × 1500 px, max. 15 fps |
|---|---|
| Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 4000 × 3000 px, max. 15 fps |
| Pixel formats | BayerRG8 BayerRG10 BayerRG12 BayerRG12 Packed Mono8 Mono10 Mono12 Mono12 Packed RGB8 BGR8 |
Functions & Controls
| Analog controls | Gain (0 … 20 dB) Offset (0 … 255 LSB 12 Bit) |
|---|---|
| Color models | Mono Raw Bayer RGB BGR |
| Basic Functions | Exposure Gain / Color Gain Trigger / Exposure Active (Flash) Binning 2x2 Partial Scan Offset Free Running Mode (Live Image) |
| Auto Functions | Exposure Auto Gain Auto White Balance Auto Color Transformation Auto |
| Image Pre-processing | Color Processing (RGB, BGR, Mono) Color Enhancement (with optimized ColorTransformationMatrix) LUT / Gamma |
| Acquisition / Interface | Burst Mode Adjustable Framerate Device Link Throughput Limit Internal Image Buffer |
| Additional Functions | User Set Integrated temperature sensor Readable additional information (e.g. sensor information) |
| Calibration data | Integrated color correction matrix (3000 K, 5000 K, 6500 K, 9500 K, and user defined) Customer data storage (128 bytes user defined) |
| Internal image buffer | 35 MB|1 image (Trigger Mode)|1 image (Free Running Mode) |
Synchronization & I/O
| Synchronization | free running trigger |
|---|---|
| Trigger sources | Hardware Software ActionCommand |
| Trigger delay | 0 … 2 s, tracking and buffering of up to 256 trigger signals |
| Process Synchronization | Events Timer Trigger Delay Debouncer Counter Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) Chunk data inside transferred image Encoder support via Counter End trigger source |
| Lines | 1 input line 1 output line 2 general purpose lines |
Interface & Connectivity
| Data interface | Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer Rate 100 Mbits/sec, Connector: 8P8C Modular Jack (RJ45), screwable type |
|---|---|
| Process interface | M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180) |
| Power supply | via M8/8 pins or Power over Ethernet (PoE) |
Mechanical
| Lens mount | C-mount |
|---|---|
| Width | 29 mm |
| Height | 29 mm |
| Depth | 49 mm |
| Weight | ≤ 120 g |
| Material | zinc die casting, baked varnish (until 02-2020 nickel-chrome-plated), IP 40 |
| Protection class | IP 40 (with mounted lens and cable) |
Electrical & Environment
| Power consumption | Approx. 2.2 W 12 VDC and 10 fps Approx. 2.7 W 48 VDC (PoE) and 10 fps |
|---|---|
| Flash memory size | 128 kB |
| Operating temperature | 0 … +65 ° T = measurement point |
| Humidity | 0 … 90 % (non-condensing) |
Compliance
| Conformity | CE RoHS KC (R-R-BkR-VCXG-125MR) |
|---|
Other
| Dark noise | 2.99 e- |
|---|---|
| Saturation capacity | 10805 e- |
| Dynamic range | 69.5 dB |
| Signal-to-noise ratio | 40.3 dB |
| Quantum efficiency | 59.4 % 465 nm|64 % 536 nm|46.4 % 631 nm |
| Voltage supply range +Vs | 12 … 24 V DC (external power supply)|36 … 57 V DC (Power over Ethernet) |
| Sealing | zinc die casting, nickel-plated, IP 40 |
| Storage temperature | -20 … +70 °C |
Data sheet
Quickstart
Quickstart – OM70-P1000.HV1000.VI
DE/EN/FR
Operating instructions
Connection diagram
Pin assignment
Beam characteristic (typically)
Laser warning
Drawings
3169-Ox700.png