Sensor
| Sensor | Sony IMX265 Gen2 |
|---|---|
| Mono/Color | Color |
| Sensor type | 1/1.8″ CMOS |
| Shutter type | Global shutter |
| Resolution | 2048 × 1536 px |
| Pixel size | 3.45 × 3.45 µm |
| Exposure time | 0.001 … 60000 ms |
Image Formats & Frame Rate
| Image formats, interface frame rate max. | Full Frame, 2048 × 1536 px, max. 55 fps Binning 2×2, 1024 × 768 px, max. 55 fps Binning 2×1, 1024 × 1536 px, max. 55 fps Binning 1×2, 2048 × 768 px, max. 55 fps |
|---|---|
| Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 2048 × 1536 px, max. 55 fps |
| Pixel formats | BayerRG8 BayerRG10 BayerRG12 BayerRG12 Packed Mono8 Mono10 Mono12 Mono12 Packed RGB8 BGR8 |
Functions & Controls
| Analog controls | Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit) |
|---|---|
| Color models | Mono Raw Bayer RGB BGR |
| Auto Functions | Exposure Auto Gain Auto White Balance Auto Color Transformation Auto |
| Image Pre-processing | Image Flipping (X/Y) Color Processing (RGB, BGR, Mono) Color Enhancement (with optimized ColorTransformationMatrix) LUT / Gamma |
| Acquisition / Interface | Burst Mode Adjustable Framerate Short Exposure Time Enable Device Link Throughput Limit Internal Image Buffer |
| Additional Functions | User Set Integrated temperature sensor Readable additional information (e.g. sensor information) Save Custom Data |
| Internal image buffer | 432 MB|48 images (Trigger Mode)|1 image (Free Running Mode) |
Synchronization & I/O
| Synchronization | free running trigger |
|---|---|
| Trigger sources | Hardware Software ActionCommand |
| Trigger delay | 0 … 2 s, tracking and buffering of up to 256 trigger signals |
| Process Synchronization | Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) PWM (PWM Duration / PWM Duty Cycle) 4 power outputs with up to 120 W (max. 48 V / 2.5 A) Selectable Output format (e.g. Tri State, Push Pull) Chunk data inside transferred image Encoder support via Counter End trigger source |
| Lines | 1 input line 3 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A) |
| Output line sources | Off Exposure Active Timer1 Readout Active User0 User1 User2 TriggerReady |
Interface & Connectivity
| Data interface | GigE USB 3.0 RS232 |
|---|---|
| Process interface | M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180) |
| Power supply | via M12/12 pins a-coded |
Mechanical
| Lens mount | C-mount |
|---|---|
| Width | 70 mm |
| Height | 70 mm |
| Depth | 120.4 mm |
| Weight | ≤ 650 g |
| Material | aluminum, hard-anodized |
| Protection class | IP 65 (with mounted tube and cable) IP 67 (with mounted tube and cable) |
Electrical & Environment
| Power consumption | Approx. 13.2 W 55 fps |
|---|---|
| Operating temperature | 0 … +65 ° T = measurement point |
| Humidity | 10 … 90 % (non-condensing) |
Compliance
| Conformity | CE UL recognized IEC/IECEE |
|---|
Other
| Processor configuration | NVIDIA Jetson Nano |
|---|---|
| GPU data | 128 Core Maxwell GPU |
| CPU data | 4-Core ARM A57 |
| Memory RAM | 4 GB LPDDR4 |
| Memory Flash | 16 GB eMMC 5.1 |
| Dark noise | 2.03 e- |
| Saturation capacity | 9375 e- |
| Dynamic range | 70.8 dB |
| Signal-to-noise ratio | 39.7 dB |
| Quantum efficiency | 46.5 % 465 nm|58.5 % 535 nm|52.9 % 630 nm |
| Color processing | Integrated color processor for high quality color calculation |
